What’s up Insiders?! There are a ton of different muscle building methods, supplements & nifty gadgets made readily available to us each day. This is awesome and very convenient especially when you know exactly what you’re looking to achieve and how you’re going to achieve it.
Now, the problem is just that. Most of us don’t have a specific goal in mind with regards to our health & fitness and have know idea of where to start. Most times we set very generic goals for ourselves such as “I want to look better with my shirt off” or “I want a six pack.” While these goals are legit and certainly attainable, simply stating a generic goal without a plan of attack or the know-how to accomplish these goals can be disasterous.
Luckily there are knowledgable individuals who have been around the block and fully dedicated their lives to uncovering the (simple) truths about health & fitness, removing the learning curve for busy bodies like us. 😉
Today, I want to share an awesome article written by Josh Bryant of T-Nation describing 4 clever devices for upper body mass. Please note, that these are relatively unknown and under-utilized methods of muscle building not because they’re innefective but because they are so creative & unique that many people (trainers included) shy away from them because they are not embraced by the mainstream – yet.
Keep training hard,
-David “Clever Muscle Mass” McCready
4 Clever Devices For Upper Body Mass
by Josh Bryant (T-Nation)
Bodybuilding is built on the spirit of ingenuity and progress. Since day one coaches and trainers have searched for better ways to build muscle size and strength, whether by experimenting with new exercises, different loading parameters, even adopting new equipment.
I know the idea of new equipment can be controversial since hardcore coaches boast about how 90% of their training is done with basic barbells and dumbbells, but increasingly these same coaches are using tools that simply weren’t around a generation ago.
The good news (for you) is many of these innovations have found their way from the high-tech performance centers to the mainstream gyms.
For example, 15 years ago, you’d have had a better chance of finding Al Gore waving glow sticks at your local rave than bands and chains at the neighborhood gym. But today, most serious training centers have bands and chains.
Let’s follow in the tradition of bucking the establishment and look at 4 powerlifting gadgets designed to amplify upper body mass.
1. The Sling Shot
So one day you realized you had triceps like a schoolgirl and decided to declare war on them. The first tour started with skull crushers and ended in defeat, not to mention a pair of cranky elbows.
The second tour started with pushdowns and ended with more pushdowns…and zero growth in your pesky triceps. Now you’re on your tenth tour.
Time to strategize, friends.
The Sling Shot is the brainchild of Supertraining Gym owner, Mark Bell. This contraption is advertised as a supportive mechanism that lets you to handle more weight while bench pressing, but it can actually do much more.
As an elite lifter, Mark designed the apparatus to mimic natural muscle movement by lengthening and shortening with the muscles. This gives support on both the negative and the positive phases of the bench press.
The result is that the Sling Shot allows a lifter to handle an additional 10% on the bench press so if you can bench 300 pounds, you can do 330 pounds with the Sling Shot.
But the Sling Shot isn’t just for equipped powerlifters. I’ve used it with elite raw bench pressers like Robert Wilkerson and “Big” Al Davis as it helps them handle supramaximal weights through a full range of motion. Additionally, stress is reduced on the chest, shoulders, and elbows, while overloading the triceps.
Here’s Robert Wilkerson doing a 675-pound close grip bench press with the Sling Shot. Robert has bench pressed 630 pounds raw in competition:
What about bodybuilding? A bodybuilder may have a couple months in the off-season to focus on bringing up his triceps. Let’s say he hits them hard once a week. That isn’t sufficient time to incorporate a gadget like a bench shirt due to the significant learning curve.
Not the case with a Sling Shot, it’s simple to use just throw it on and go!
The monstrous loads being used and the reduction of chest and shoulder contribution amounts to a perfect storm for stubborn triceps, resulting in some very rapid triceps growth along with a bigger bench press.
Close grip bench presses with a regular bar or neutral grip bar are obvious choices, but even weighted dips can be done with a Sling Shot, allowing for heavier weights and greater triceps overload.
Here’s Big Al Davis performing weighted dips with a Sling Shot:
Here’s an example of a bodybuilding arm workout using the Sling Shot:
Exercise Sets Reps
A Close Grip Swiss Bar Press (with Sling Shot) 4 5, 5, 5, AMAP
B Incline Dumbbell Curl 4 10, 10, 10, 15
C1 Weighted Dips (with Sling Shot) 3 8
C2 Overhead Rope Extension 3 15
D1 Reverse Fat Bar Curl 3 to failure
D2 Fat Bar Curl 3 to failure
E One-Arm Band Pushdown 2 40 sec. per arm
2. Bands and Chains
Many studies show that bands and chains can get you stronger. What many lifters fail to realize is that the adaptations are not only neural, but highly anabolic.
In other words, bands and chains can help you get stronger and bigger!
The barbell bench press is a great example of the potential benefit of bands and chains. As a lifter lowers the barbell down to his chest and then pushes it back to arms’ length (the starting position), the resistance (bands/chains) decreases on the way down and increases on the way up.
Look at what’s taking place as you complete the press, more force is required to finish the lift, and as the range of motion increases, so does resistance. This results in an opening of the anabolic gateway simply because you’re forced to recruit more muscle fibers. That means more growth and increased strength.
Chains feel much more like a barbell bench press using standard weights than bands do. In a way, chains are the missing link between band-resisted movements and movements that use traditional iron.
Typically, chains are draped from the end of a barbell. Using the bench press as an example, the chain will subsequently unload link by link on the floor meaning as you descend into the bottom position, resistance will be the lowest where you’re the weakest. As you lift the weight back up, the resistance will increase as each link is lifted off the floor.
Most folks can lock out more weight than they can bench through a full range of motion. This is because your leverage improves as you lock out the weight, so with chains resistance increases where you can handle it. This causes a hellacious overload through the entire movement.
Bands work similar to chains as leverage improves, resistance increases. But bands in the bench press don’t just hang off the bar onto the ground they’re attached to the floor, whether around a dumbbell, a specialized attachment, or even just the bottom of a power rack.
As the two ends of the band get closer together on the descent of a bench press, the resistance decreases; as you press the weight back up and the bands pull farther apart, resistance increases.
Bear in mind, bands cause an over-speed effect on the eccentric portion of the movement. Performing high reps or using them too frequently puts you at a greater risk of overtraining. But there’s a positive point here, too greater eccentric stress can help elicit greater muscle growth.
High-rep band training on pressing movements should generally be in the 6-8 rep range.
Bands and chains don’t have to be used for just core movements. Think outside the box and throw a band around the pec dec, or put it around your back and do dumbbell flyes. Do lateral raises with chains. Experiment!
Take a look at one unconventional strategy I’ve used with clients like Branch Warren to raw bench press phenomenon, Al Davis, shown in the video below:
Dumbbell flyes are a great chest exercise, but for those with shoulder problems they may fall on the risk side of the risk-to-benefit ratio due to the excessive strain in the stretched position. In this situation, many opt to perform cable flyes instead.
However, chain flyes are a game changer! Chain flyes are performed by attaching cable crossover handles to chains.
This allows you to get some of the stretch of a dumbbell flye, but as your arms abduct to the fully stretched position, the chains unload on the floor, removing much of the strain off the shoulders. As you adduct, or squeeze your arms back together, the chains start to lift off the floor again, providing the peak contraction advantage of the cables.
This traditional “stretch” movement has morphed to a “stretch and contract movement,” and is now an economic isolation exercise.
Here’s IFBB Pro Cory Mathews performing chain flyes:
Bands and Chains: Points to Ponder
Bands cause a more powerful eccentric.
Chains feel more like standard weights than bands.
Bands are easier to over train.
Avoid sets of over eight reps with bands (on compound movements).
Bands allow non-linear resistance, unlike chains (i.e., they can be attached to a pec dec or diagonal leg press and still work).
Neither should be used more than three weeks in a row because of potential over training.
It’s easier to overtrain with bands and chains than with traditional resistance.
Bands and chains can even help some lifters work around injuries. Because overload is reduced at the bottom of the movement (especially reverse band movements), it can be very helpful for lifters with shoulder problems.
Use bands and chains on ascending strength curve exercises (those that get easier at the top, like presses), not on descending strength curves (those that are hardest at the top, like rows).
For traditional core movements, use 10-25 percent additional band/chain resistance. This is a guideline, not a rule.
3. Bench Press with Weight Releasers
Achieving maximum muscular development requires an emphasis on eccentric training, as studies show lifters can handle up to 160 percent more on an eccentric movement than a concentric one.
Powerlifters often use weight releasers to help take advantage of this sizeable training effect and bodybuilders are increasingly starting to get in on the action. In fact, I used them as part of Cory Mathews’ training regimen in preparing for his IFBB Pro Card win in bodybuilding this year.
With weight releasers, overloading the eccentric portion of the first repetition leads to greater concentric force on the ensuing repetitions. In other words, because you lift more on the way down on the first rep, you can lift more weight in ensuing reps and gain more muscle.
Check out powerlifter Ed McKelvey using weight releasers in the video below:
How to correctly perform a bench press with a weight releaser:
Attach the weight releasers to the bar.
Lower the bar like a normal bench press.
As the bar touches your chest, the weight releasers release; therefore, you only push up the bar weight.
Return to the starting position and repeat reps without weight releasers.
Important note: For weight releasers, anywhere from about 5-25 percent of the bar weight can be used on the releasers to build muscle. These can be performed with a drawn-out eccentric or at a traditional tempo.
If done without purposefully slowing the eccentric, the positive portion of the rep should feel much more powerful due to the overload of the stretch shortening cycle.
Here’s one strategy to use weight releasers on the bench press for muscle growth:
Load 20 percent of your 1RM on the weight releasers.
Start with 70% of your 1RM of bar weight.
Don’t change weight on releasers.
Progressively work up to a 5RM over 4-5 sets.
Remember on the first rep before the weight releaser “releases,” control the eccentric for safety and muscle growth.
4. Board Presses
Board presses are the bread and butter Max Effort exercise for many top equipped bench pressers. However, this movement can serve as a valuable tool in a bodybuilder’s training regimen.
Using maximal poundages on the board presses results in a mammoth overload on the triceps. In addition, board presses can allow even the most shoulder-weary warrior the ability to keep on pressing.
From a strength perspective, boards provide sufficient overload to targeted portions of the bench press. However, the potential problem is the lack of transition phases within the bench press.
This should be a point of consideration for raw powerlifters looking to add numbers to his/her bench, but if you’re trying to overload the triceps, then pile on the pig iron and go to town!
Board presses can be used for strength work at or above your 1RM, for repetition work, burnouts, and even drop sets. To further overload the triceps, do board presses with a close grip.
Here’s one of my favorite board press mechanical drop sets:
Load the bar with 60% of your 1RM max bench press.
With a close grip, do a full range of motion bench press for five repetitions.
Don’t rack the weight. Keep it pressed above you.
Have your spotter place one board lengthwise on your chest. Do this for another 5 reps, lowering the barbell until it touches the board.
After every 5 reps, your partner will stack on another board, so as fatigue increases, leverage improves, thus allowing you to keep going and working more muscle fibers in different ways.
The set ends with four boards on your chest. You’ll have done a total of 25 repetitions. And your triceps will be screaming!
Voltaire said, “It requires ages to destroy popular opinion.” Why not try going against the grain for a better gain? The risks are minimal and the rewards could exceed your wildest expectations.
Latest posts by David (see all)
- 10 Reasons You Shouldn’t Hire A Personal Trainer Without Reading This - October 28, 2014
- Official New Mood Review - June 4, 2014
- 3 Reasons You Need To STOP Squatting - June 2, 2014